The waterproofing membrane price is in a square meter. Considering the use of excess amount when insulating the downpipe and corner’s walls. The Amount consumed of the rubber and the cost is increased.
The unit of the implementation of insulating is per aquaew meter. And when installing the insulation, the price for the implementation of insulation is given in terms of square meter (depending on the contract can be changed).
The amount of used waterproofing membrane used, is 15 to 20 percent more than the insulation level. At the end of the work, the finished cost is based on the area of the spent Isolated. And it is necessary to inform the customer when the contract concludes.
This is due to an increase in the amount of consumption and a rise in prices due to the overlap of roller coils of 10 centimeters. And, along with its installation on the roof edge, it use to prevent moisture penetration. And the use of the internal edges of the studs and the edges of the heater chimneys and fan hoods used in the building is very common.
Various factors affect on waterproofing membrane
some of which are:
- Execution quality of ISO
- Quality of work execution
- Provide valid warranty to resolve possible problems
- Place the project and the severity of the project
- Available vendor and executor with office and fixed site and many other factors
When the surface and the meter are very small and only to eliminate the failure of the isolation bonding. The offered price is not calculated in terms of square meters, and according to the amount it is agreed upon between the parties.
It should be noted that the price of the waterproofing membrance with installation and operation is different with the purchase of insulation without them.
The various types of waterproofing membrane
The waterproofing membranehave is a various types. That each of which has its own performance and use in its own place. And also depending on the materials used, the price of the rubble is different. For example, in the polymeric waterproofing membrane , the price of the polymer bitumen is due to the use of 60 to 70 percent pure bitumen in its production relative to Bleed waterproofing membrane are more expensive as well as coated aluminum coats with a higher price than non-coated aluminum casings.
The price of the waterproofing membrane coated by cobblestones is different from the price of the rest of the insulations. The price of its raw materials plays a huge role in the pricing of companies and factories on the product.
Finally, the purpose of writing these articles is to examine some of the factors affecting the waterproofing membrane price.